By john 
A wired connection is supposed to be the reliable one, so seeing no internet access over Ethernet is a surprise. The cable shows as connected, yet nothing loads. This usually points to a cable, a router, or an IP setting rather than a serious fault, and a few checks normally get you back online.
Possible Causes
A faulty or loose Ethernet cable is a common cause, as the connectors can work loose or the cable can be damaged. A router that needs restarting is another frequent reason.
An expired IP address, a DNS problem, or a brief outage from your provider can also leave a wired connection online but unable to reach the internet.
First Troubleshooting Steps
Check the Ethernet cable at both ends and reseat it firmly, since a slightly loose connector is easy to overlook. Then restart both the router and the computer, which clears many wired connection issues.
Test a different cable or a different port on the router to rule out a hardware fault in either.
Advanced Steps
Renew your connection by releasing and renewing your IP address from Command Prompt, which forces a fresh request to the router. Update the Ethernet adapter driver as well, in case it is out of date.
Switching to a reliable public DNS such as 8.8.8.8 can help if a DNS problem is preventing pages from loading.
It is also worth disabling and re-enabling the Ethernet adapter in your network settings, which forces Windows to rebuild the connection from scratch. Running the built-in network troubleshooter alongside this often detects and repairs the exact setting that is blocking internet access on the wired connection.
Safety and Data Warning
Make a note of your current DNS and IP settings before changing them, so you can restore the originals if needed. Use only official drivers from your manufacturer, and avoid third-party tools that claim to repair network connections.
If you try a different cable, make sure it is a good-quality Ethernet cable rated for your connection speed, since a damaged or low-grade cable can cause exactly this kind of problem. Keep a spare known-good stadium togel cable on hand, as it makes testing wired connection faults much quicker in future.
When to See a Technician
If WiFi works fine but the wired connection never does, even with a new cable, the Ethernet port may be faulty. A technician can test the port and advise on a repair, or suggest a USB Ethernet adapter as a quick alternative.
Conclusion
Most wired no-internet problems come from the cable or IP settings. A new cable, a router restart, and renewing the IP address resolve the majority of cases and restore your wired connection.